GTA 6 Best Settings on PS5: What to Actually Change
If you have just installed GTA 6 on your PS5 and your first instinct is to open the settings menu and hunt for a Performance Mode switch, here is the honest answer before you waste an evening on it: there is no Performance Mode in GTA 6. The game runs at 30 frames per second on every console, and no menu option changes that. So what should you actually change? The settings that matter live in three places: a few comfort options inside the game's own menu, your PS5's system settings, and your TV. This article walks through each one in the order that makes the biggest difference, and calls out the settings that do nothing at all.
Most of the settings pages ranking on Google right now are still wrong about this — they describe a 60 fps mode that does not exist, or they were written before launch from guesswork. The facts below come from Rockstar's own announcements and Digital Foundry's hands-on testing after launch.
First, the Truth About Performance Mode
Rockstar's Newswire post from 10 November 2026 says the game targets 30 frames per second on current consoles — and it names no performance mode, no quality mode, and no 60 fps option. Digital Foundry, after more than 100 hours of testing across all four console versions, found "no option for a 40fps or 60fps mode on any platform." There is simply no switch to find.
The reason is the CPU, not the graphics. Rockstar's Technology Production Director, Marc Chambers, told Push Square that the PS5 Pro's CPU is "not powerful enough to run the game's complex simulation at higher frame rates" — the Pro's processor runs only about 7% faster than the base PS5's. Kotaku reported on 18 November that Rockstar has ruled out adding a 40 fps or 60 fps mode in a post-launch update. Do not wait for a performance patch, and do not buy a new console expecting one.
Here is what each console actually does, using Rockstar's own stated figures:
| Console | Internal resolution | Upscaling |
|---|---|---|
| PS5 | 1440p | Rockstar's own TAA, upscaled to 4K |
| PS5 Pro | 1440p | PSSR2, upscaled to 4K; ray-traced shadows, Pro only |
| Xbox Series X | 1440p | Rockstar's own TAA, upscaled to 4K |
| Xbox Series S | 720p | AMD FSR 4, upscaled to 1080p |
Those figures are Rockstar's stated numbers, not independent measurements — but Digital Foundry's testing backs them up. The PS5 Pro is the best way to play, with a near-flawless 30 fps across roughly 50 to 75 hours of standard play and a single dip to 24 fps only in an extreme stress test. The base PS5 "does struggle to hold 30fps more often than expected," but only by a little: very minor dips into the high 20s, for example while driving around the city. The Series X lands in the same place, and the Series S — mid-20s in combat, about 20 fps at worst — is the version to avoid for now, if you have a choice. The Pro's extras are automatic: it is the only version with ray-traced shadows, and its PSSR upscaling gives it the clearest image, but there is nothing extra to switch on.
Your TV Settings Matter More Than the Game Menu
Since the game gives you no frame-rate lever to pull, the biggest visible difference comes from your TV and your console's video output. Do these first.
Turn on your TV's Game Mode. It cuts the picture processing that adds input lag, and at a locked 30 fps that extra lag is genuinely noticeable — every button press already waits longer between frames, so you do not want your TV adding its own delay on top. On PS5, go to Settings, then Screen and Video, then Video Output, and set ALLM to Automatic: the console will switch your TV into Game Mode by itself whenever it starts a game, if your TV supports it.
Next, calibrate HDR. On PS5, go to Settings, then Screen and Video, then Video Output, then Adjust HDR, and run through it on the picture preset you actually play on. If your display offers HGiG, enable it: it is the baseline Rockstar itself points to for displays that support it, and it stops the TV from over-brightening the image. Then turn motion interpolation off — your TV may call it smooth motion or motion smoothing. It is designed to make films look smoother by inventing extra frames, but it cannot help a locked 30 fps game, and it adds lag and a strange soap-opera look. Switch it off for the input your PS5 uses. Finally, leave the resolution on Automatic, and remember that a 120 Hz display cannot turn a 30 fps game into a 60 fps one.
![]() |
| TV picture settings menu with Game Mode highlighted |
The In-Game Settings Worth Changing First
Open the pause menu and choose Settings. Rockstar's official settings support article splits the menu into seven tabs — Control Scheme, Controller, Gameplay, Display, UI, Camera, and Audio — and nothing here is permanent: Restore Default and Restore All sit at the bottom of the Settings screen.
Here are the changes that make the biggest difference, with the default next to each one:
| Setting | Where | Default | Change it to |
|---|---|---|---|
| Control Scheme | Control Scheme | Default | Classic, if you played GTA 5 |
| Targeting | Gameplay | Partial | Lock-On for easier fights |
| Aim Assist Strength | Gameplay | 4 (scale of 0 to 5) | Leave at 4 |
| Motion Blur Strength | Display | 3 | 0, for the sharpest image at 30 fps |
| Camera Shake | Camera | On | Off, if chases are hard to follow |
| Navigation | UI | Your first-launch pick | Always On, while you learn the map |
| Subtitles | UI | Mission Only | On, so you catch radio, phone and street chatter |
The very first thing GTA 6 asks you on launch is which Navigation Experience you want, without showing you what each one looks like. Do not overthink it: you can change it any time under Settings, then UI, then Navigation. Minimap (Dynamic) hides the map in quiet moments; Minimap and Compass (Dynamic) adds a compass with your markers; Always On never hides it. While you are still learning the roads of Leonida, Always On is the easiest choice. The same section lets you switch on GPS Voice, which reads out turn-by-turn directions — it is off by default, and worth turning on until you know the map.
![]() |
| GTA 6 pause menu settings screen with tabs |
Aiming Settings That Feel Right Faster
There are three targeting modes. Lock-On snaps to the nearest enemy, Partial gently pulls your aim toward a nearby target, and Free Aim gives you no help at all. If you are here for the story, pick Lock-On and leave Aim Assist Strength at its default of 4, or nudge it to 5. If you want more of a challenge, pick Free Aim and drop the assist to 0 — but not on your first night, because Free Aim is also the mode you need when you want to shoot something that is not an enemy. Shooting Assist and Drive-By Assist can stay on for relaxed play and go off when you want the challenge; Quick Draw, which lets L2 and R2 pull out your last-used weapons, is worth keeping on in both cases.
GTA 6 has no difficulty setting, but the Gameplay tab has Accessible Combat and Reduced Vehicle Damage, which make enemies weaker and getaways more forgiving without locking you out of trophies.
![]() |
| Character aiming a pistol from behind cover at night |
Camera and Comfort Settings
The Camera tab has separate sections for on foot, vehicles, aircraft, underwater and cinematic cameras — and a Comfort section, which is the first place to look if the camera makes you feel queasy. Camera shake is a simple on-or-off switch, and turning it off makes chases and shootouts much easier to follow. The cinematic cameras, for kill-shots and vehicle crashes, run on a scale up to 5: lower them if slow-motion replays keep interrupting the action. And if walking or driving leaves you uneasy, tone down head bob and camera movement in the Comfort section before your next session.
Motion blur is the single in-game change most players notice first. The default strength is 3, and at a locked 30 fps that blur smears the picture every time you turn the camera. Dropping it to 0 gives you the crispest image the game can produce; if it feels too sharp, try 1. One last camera fact: GTA 6 is a third-person game, and first person only kicks in when you aim certain weapons. There is no first-person toggle to find.
![]() |
| Sunset drive through a neon city street |
Sound and the PS5-Only Extras
The Audio tab has separate volume sliders for dialogue, music, sound effects, UI and media — so if the radio drowns out conversations, raise dialogue instead of turning everything up. If you play on headphones, go to your PS5's own settings, then Sound, then 3D Audio (Headphones), and pick Create Personalized 3D Audio Profile: it tunes Sony's Tempest 3D AudioTech to your ears, and it makes a real difference in a game where you need to hear where trouble is coming from.
The DualSense controller gets its own attention too. Rockstar's pre-load announcement notes that the haptics are adjustable through the accessibility settings, and on the console side you can lower Trigger Effect Intensity under Settings, then Accessories, then Controllers, if the adaptive triggers tire your fingers during long sessions. Also turn on spoiler warnings, so flagged story content is blurred in other players' screenshots and clips, and mute licensed music if you stream — Leonida's radio is full of licensed tracks.
![]() |
| DualSense controller close-up on a table |
Settings That Do Nothing — Skip These
Some settings sound like they should help, and chasing them is how launch week gets wasted. VRR is the biggest one. PlayStation's VRR only kicks in above 48 frames per second, so it does nothing in a 30 fps title — turning it on will not hurt, but it will not smooth anything either. Xbox has one small extra here: its system settings can run the game in a 120 Hz VRR mode, which Digital Foundry says gives some benefit. On PS5, leave VRR on Automatic and stop thinking about it.
The vignette is the other trap. The darkened corners of the screen are an artistic choice, and Rockstar's VP of Dynamic Art, Michael Kane, has said so plainly: "We currently do not support any toggle" for it. There is no switch to turn it off. And a final reminder, because it is the mistake most of the internet is still making: there is no Performance Mode, no Quality Mode, and no resolution selector in the released game. If a page tells you to switch to one, it is describing a game that does not exist.
PC Players Are Still Waiting
Everything above is for consoles, because that is all GTA 6 has right now. No PC version has been announced, and there is no release date, no store page, and no official system requirements. If you play on PC and want the full confirmed position — including what the one big report actually claims and why the fake download pages are dangerous — read Is GTA 6 Coming to PC? What Is Confirmed So Far.
Frequently Asked Questions
Does GTA 6 have a Performance Mode on PS5?
No. GTA 6 targets 30 frames per second on every console, and there is no performance or quality toggle in the released game. Rockstar has ruled out adding a 40 fps or 60 fps mode in a post-launch update.
Is the PS5 Pro version better?
Yes, for picture quality — but not for frame rate. The Pro adds PSSR upscaling for a clearer image and ray-traced shadows, which only the Pro has, and it holds 30 fps more steadily than the base PS5. Both run at the same 30 fps, and the Pro's extras switch on automatically.
Can I turn off the vignette, the darkened screen corners?
No. Rockstar has said the vignette is an artistic choice and there is currently no toggle for it.
The short version, then: stop hunting for a Performance Mode, turn on Game Mode, calibrate HDR, switch motion smoothing off, and spend ten minutes in the game's own menu on the settings in the table above. That is the whole job — and then Leonida is yours.




