How to Fix Windows 11 Black Screen With Cursor
Your PC is on, the mouse moves, and nothing else shows up. That black screen with a cursor means Windows did start — it just never drew your desktop. In most cases the fix takes about two minutes and no tools: press Windows + Ctrl + Shift + B to restart the graphics driver, then press Windows + P and pick PC screen only. If the desktop still does not appear, press Ctrl + Shift + Esc, find Windows Explorer in Task Manager, right-click it and choose Restart. One of those three steps fixes the large majority of black screens with a cursor. The rest of this article works through the deeper fixes in the same order — safest and quickest first — so stop as soon as your desktop comes back.
Every step below was checked against Microsoft's own blank-screen troubleshooting on 12 November 2026. If a menu label looks different on your PC, search Settings for the step name and you will find it.
What a Black Screen With a Cursor Actually Means
A movable cursor is good news. It means your monitor works, your graphics card is putting out a picture, and Windows loaded far enough to run the mouse. What failed is the last part of startup: the desktop shell, called Windows Explorer, never appeared, or the graphics driver stalled while drawing it. A dead graphics card or a failed drive usually gives you no cursor at all. A cursor on black almost always points to one of four things: a stalled graphics driver, a crashed desktop shell, a picture sent to a monitor that is not there, or a recent update that broke startup.
Before You Start: 30 Seconds of Checks
Check the monitor's power light, and on a laptop press the brightness-up key a few times — some laptops wake with brightness at zero after an update. Push the HDMI or DisplayPort plug firmly in at both ends, and try a spare cable if you have one. If your monitor has more than one input, press its Input button and make sure it is set to the port your PC uses. Then unplug everything you do not need — external drives, USB hubs, a second monitor, a docking station — and restart. On a laptop, also try plugging in a TV or monitor: if the picture appears there, your laptop works and the problem is its built-in screen, its cable, or a display setting.
Method 1: Restart the Graphics Driver (10 Seconds)
Windows has a built-in key combination that restarts the graphics driver on the spot, without closing your apps or restarting the PC. Microsoft documents it in its own blank-screen troubleshooting. Press and hold Windows + Ctrl + Shift + B at the same time. If it worked, you will hear a short beep and the screen will flicker or blink once as the driver restarts. Give it a few seconds, then wait to see if the desktop appears.
![]() |
| Keyboard - Windows, Ctrl, Shift, B |
If nothing happens — no beep, no flicker — try the next step anyway. On some PCs the beep is silent, and on others the driver is too stuck to respond. This shortcut fixes a stalled driver, not a broken one: if the driver itself is damaged or the wrong version, you will need Method 5 below. But try this first every time, because when it works it works in seconds, and it costs you nothing.
Method 2: Make Sure the Picture Is Going to the Right Screen
Windows sometimes decides your picture belongs on a monitor that is switched off, unplugged, or in another room — a second display you used once, a TV you disconnected, a projector from a meeting. Your PC is happily showing the desktop. Just not on the screen in front of you.
Press Windows + P. A small menu appears on the right side of the screen — you may not see it, because the screen is black, but it is there. Press P again, then press Enter. That cycles to the next display mode. Wait a few seconds, and if nothing appears, repeat: Windows + P, then P, then Enter. The four modes cycle in this order: PC screen only, Duplicate, Extend, Second screen only. One of them puts the picture back on the screen you are looking at.
Method 3: Restart Windows Explorer From Task Manager
If the shortcuts above did not bring the desktop back, the next suspect is Windows Explorer — the process that draws your desktop, taskbar and icons. When it crashes during startup, Windows keeps running behind a black screen, and all you see is the cursor. Restarting Explorer brings the whole desktop back with it.
Press Ctrl + Shift + Esc to open Task Manager directly. If nothing appears, press Ctrl + Alt + Del instead and choose Task Manager from the screen that appears. If that security screen shows up at all, it is useful information: Windows itself is alive, and only the desktop shell is missing. In Task Manager, look on the Processes tab for Windows Explorer. Right-click it and choose Restart. Your taskbar and icons should reappear within a few seconds. If Windows Explorer is not listed at all, click Run new task at the top of Task Manager, type explorer.exe, and press Enter.
![]() |
| Task Manager - Restart Windows Explorer |
If the desktop comes back now, you are done. A one-off Explorer crash is normal — but a crash that comes back every morning is not. If it happens again tomorrow, run the driver fix in Method 5 and the file repair in Method 7, because something underneath is making Explorer fall over.
Method 4: Get Into Safe Mode
If the keyboard fixes and the Explorer restart all failed, you need Safe Mode. Safe Mode starts Windows with a minimal set of drivers and no startup programs, so a bad driver or a startup app cannot get in the way. If the desktop appears in Safe Mode, you have proved the problem is software — a driver, an update, or a startup program — and not your hardware.
To reach Safe Mode when you cannot see anything, use the Windows Recovery Environment. Turn the PC on, and as soon as you see the manufacturer's logo or the spinning dots, hold the power button for about 10 seconds until it switches off. Do that twice. On the third start, Windows should open the Automatic Repair screen instead of booting normally. From there, choose Advanced options, then Troubleshoot, then Advanced options again, then Startup Settings, then Restart. When the list of startup options appears, press 4 for Safe Mode, or 5 for Safe Mode with Networking if you need the internet to download a driver.
![]() |
| Recovery - Troubleshoot, Advanced options, Startup Settings |
One warning before you go in: if your drive is encrypted with BitLocker, Windows may ask for your BitLocker recovery key at this point. It is the 48-digit key in your Microsoft account at account.microsoft.com/devices/recoverykey. Without it, you cannot get into the recovery options.
Method 5: Roll Back or Reinstall the Graphics Driver
A black screen that started right after a driver update — or after a Windows update that quietly replaced your driver — usually means the new driver does not get along with your display. The fix is to go back to the one that worked, or to wipe the driver and let Windows install a fresh copy.
In Safe Mode, right-click the Start button and choose Device Manager. Expand Display adapters, right-click your graphics card, and choose Properties. On the Driver tab, click Roll Back Driver if it is available, and pick the reason Windows asks for. The button is greyed out when Windows has no older driver saved — in that case, choose Uninstall device instead, tick Delete the driver software if you see it, then restart. Windows will install a basic driver on the next boot, and your screen should come back.
![]() |
| Device Manager - Display adapters, Roll Back Driver |
Once the picture is back, install the driver properly. The safest source is your PC maker's own support page or the graphics chip maker — NVIDIA, AMD or Intel. Avoid driver-updater tools that promise to find drivers for you; they are the source of a surprising number of black screens in the first place.
Method 6: Uninstall the Update That Broke It
If the black screen started the morning after a Windows update, the update itself is the prime suspect. An incomplete or incompatible update can leave Windows unable to finish loading the desktop. Removing the most recent update puts things back the way they were.
If you can get to the desktop — in Safe Mode, for example — open Settings > Windows Update > Update history > Uninstall updates, find the most recent update, and uninstall it. If you cannot get to Settings at all, do it from the Recovery Environment instead: Troubleshoot > Advanced options > Uninstall Updates, and choose Uninstall latest quality update first. Only uninstall a feature update if the quality update did not fix it, and never remove a security update unless you have to.
![]() |
| Settings - Windows Update, Uninstall updates |
After the update is gone, restart normally and check whether the desktop returns. If it does, pause updates for a week before letting Windows try again: Settings > Windows Update has a Pause updates option. That gives Microsoft time to fix the faulty update instead of reinstalling the same broken one tomorrow.
Method 7: Repair Damaged System Files
Corrupted system files are the quiet cause behind black screens that survive everything else. The fix is two built-in commands that scan Windows and replace damaged files. Run them from an administrator Command Prompt — in Safe Mode, or from the Recovery Environment if you cannot reach Safe Mode.
Open Command Prompt as an administrator. In Safe Mode, right-click Start, choose Terminal (Admin) or Command Prompt (Admin), and click Yes. In the Recovery Environment, go to Troubleshoot > Advanced options > Command Prompt. Then type this command and press Enter:
sfc /scannow
Let it finish — it usually takes 10 to 20 minutes. If it reports that it could not fix everything, run this second command, which repairs the store of files that SFC draws from. DISM needs an internet connection in Safe Mode with Networking, and it can take 20 minutes or more:
DISM /Online /Cleanup-Image /RestoreHealth
When it finishes, run sfc /scannow once more, then restart normally.
Method 8: System Restore — Go Back to When It Worked
If every method above has failed, System Restore is the last software fix before considering a reset. It rolls Windows back to a restore point — a snapshot of your system files and settings from a day when the PC worked — without touching your personal files. Photos, documents and downloads stay where they are; only system changes made after that date are undone. From the Recovery Environment, go to Troubleshoot > Advanced options > System Restore, pick the most recent restore point from before the black screen started, and follow the prompts. The catch is that System Restore only works if a restore point exists — Windows creates them automatically before updates and driver installs, so there is usually at least one.
When It Is Probably Hardware
Software fixes have limits. If the screen stays black even in Safe Mode while an external monitor shows nothing either, or you hear no fans and see no lights, or the black screen came with a burning smell or visible damage, the problem is likely physical. Stop and get the machine looked at — a repair shop can test the graphics card, the display cable and the power supply in minutes. And if the PC is still under warranty, do not open the case yourself: opening it can void the warranty, and a warranty repair is free.
Frequently Asked Questions
Will I lose my files if I get a black screen with a cursor?
No. A black screen with a cursor means Windows cannot show the desktop, not that your files are gone. Every method in this article leaves your files alone, and System Restore keeps your personal files too. Only a full reset or a fresh install of Windows would remove them, and that is not part of any step above.
Should I reset Windows if nothing works?
Only after Methods 1 to 8 have all failed, and only after backing up your files. From the Recovery Environment, Troubleshoot > Reset this PC offers Keep my files, which reinstalls Windows but keeps your personal files. Treat it as the last step, not the first — a reset takes an hour or more, and it wipes your installed programs even when it keeps your files.
A black screen with a cursor looks like a dead PC, but it is almost never one. Your computer is running, your files are safe, and in most cases the whole problem is a stalled driver or a crashed desktop shell — two things a few keystrokes can fix. Start with Windows + Ctrl + Shift + B, work down the list in order, and stop the moment your desktop comes back.




