How to Check Battery Health on Android (Samsung, Pixel, Xiaomi)
Your Android phone does have a battery health check. It is just hiding in a different place depending on who made your phone. On a Pixel 8a or newer, open Settings, then Battery, then Battery health. On a Samsung Galaxy, open the Samsung Members app and run the Battery status diagnostic. On a Xiaomi, dial *#*#6485#*#* and read the MB_06 line. And if your phone shows no built-in number at all, the free app AccuBattery can measure it for you — but only after about two weeks of normal charging, so ignore anything it says on day one.
This article walks you through each method, brand by brand, and explains what the number means — including the 80% line where Google says it is time to think about a replacement. Menu names were checked against Google, Samsung and Xiaomi help pages on 12 November 2026; they can shift with updates, so search Settings for "battery" if a label looks different.
What Battery Health Actually Means
Battery health is a simple comparison: how much charge your battery can still hold, measured against what it could hold on the day the phone was new. A phone at 92% holds about 92% of its original capacity; a phone at 78% holds just over three quarters, which is why it dies by dinner time.
Two numbers matter. The first is the health percentage above. The second is the cycle count — how many full 0 to 100% charges the battery has done, even in pieces across days. Google rates Pixel 8a and newer to keep up to 80% capacity for about 1,000 cycles; older Pixels for about 800.
One honest warning: every number here is an estimate, not a lab measurement. Your phone calculates it from voltage, temperature and charging history, and it can move a few percent after an update. Good enough to decide whether to repair or replace a phone — not precise to the last percent.
Find Your Phone's Check in 30 Seconds
Find your brand, try the built-in check first, and only move on to the app method if your phone shows nothing.
| Phone | Where to look | What you get |
|---|---|---|
| Google Pixel 8a and newer | Settings > Battery > Battery health | Normal or Reduced, plus an estimated capacity percentage |
| Google Pixel 6a to 8 Pro | Settings > Battery > Battery diagnostics | A pass-or-fail diagnostic — no percentage |
| Samsung Galaxy | Samsung Members > Support > Phone diagnostics > Battery status | Normal, Weak or Bad |
| Xiaomi, Redmi, POCO | Dial *#*#6485#*#* (or Settings > Battery > Battery Protection on newer HyperOS phones) | Health verdict, cycle count and capacity in mAh |
| Any other Android | AccuBattery from the Play Store, after two weeks of use | Estimated capacity in mAh and as a percentage |
Method 1: Samsung Galaxy — the Samsung Members Diagnostic
Samsung shows no health percentage in Settings on most Galaxy phones. Instead, its diagnostic tool gives a verdict — Normal, Weak or Bad — and that is the number Samsung itself trusts.
Open the Samsung Members app. It comes preinstalled on most Galaxy phones, and you can install it free from the Play Store if yours is missing. Tap the Support tab at the bottom, then tap Get Started under Phone diagnostics. Once the diagnostic finishes, tap the Battery status icon to see the result. On some models the same diagnostic is also reachable through Settings > Battery and device care > Diagnostics, but the Samsung Members route works on the widest range of phones.
![]() |
| Samsung Members - Phone diagnostics battery status |
Normal means the diagnostic found no battery problem. Weak means battery efficiency has dropped — usually from long-term use or from heat, like a summer spent charging in a hot car. Your phone still works, but the days get shorter, and it is worth changing your charging habits now. Bad means the battery has degraded significantly, and Samsung's own advice is to visit a service centre for a replacement. Do not try to translate these words into an exact percentage — Samsung does not publish a conversion, and "Weak" does not automatically mean 80%. If you want a number on a Samsung, skip to the AccuBattery method below. On newer Galaxy phones running One UI 7 or later, such as the S24 series and newer, a battery information page with capacity and cycle count is also starting to appear under Settings > Battery.
Method 2: Google Pixel — the Only Android With a Real Health Screen
Pixel phones are the one Android brand with a built-in health screen that works like the iPhone's. The catch is that it only exists on newer models. Open Settings, tap Battery, then tap Battery health. You will see one of two words: Normal, which means capacity is within normal limits, or Reduced, which means it has fallen below 80% — and Google recommends considering a battery replacement. Tap Battery capacity on the same screen for the estimated percentage, and open Settings > About phone > Battery information for your cycle count.
| Pixel - Settings, Battery, Battery health |
Google says the Pixel 6a, Pixel 7, Pixel 7 Pro, Pixel 7a, Pixel 8 and Pixel 8 Pro do not show a battery health status, and neither does the Pixel Tablet. If that is your phone, use the built-in diagnostic instead: on Pixel 6 and later, open Settings > Battery > Battery diagnostics and run the check. It tells you whether the battery has a problem, though not by how much. For an actual percentage on these models, the AccuBattery method below is your best option.
Method 3: Xiaomi, Redmi and POCO — the Hidden Dialler Code
Xiaomi hides the most detailed battery data of any Android brand — cycle count, current capacity and factory capacity, all in raw numbers. On newer Xiaomi phones, especially the Xiaomi 15 series and later, first try Settings > Battery > Battery Protection > Battery Health — if it is there, you will see your maximum capacity as a percentage. Xiaomi is still rolling this screen out, so if it is missing, use the dialler code below.
Open the Phone app and dial *#*#6485#*#*, exactly as written. You do not need to press call — the Battery Info screen opens by itself. It looks like a wall of technical codes, but only four lines matter:
- MB_06 — the health verdict. "Good" means the battery is in good condition.
- MF_02 — the charge cycle count.
- MF_05 — the current capacity, in mAh.
- MF_06 — the factory capacity, in mAh, what the battery held when new.
To turn those two capacity numbers into a health percentage, divide the current capacity by the factory capacity and multiply by 100. For example, if MF_05 shows 4,250 mAh and MF_06 shows 5,000 mAh, your health is 4,250 ÷ 5,000 × 100 = 85%. If the menu does not open at all, your model or software version blocks it — try the AccuBattery method instead.
![]() |
| Xiaomi - Dialler code battery info screen |
Method 4: Any Android Phone — AccuBattery
If your phone is a OnePlus, Motorola, Oppo, Vivo, Realme or anything else without a built-in health screen, this is the method for you. AccuBattery is free on the Play Store, and it measures real capacity by watching how much charge goes in during each session.
Install AccuBattery, grant the permissions it asks for, and then just use your phone normally. Open the Health tab after about two weeks of regular charging. It shows your estimated capacity in mAh next to the design capacity, and the percentage between them is your battery health. The number it shows on day one is meaningless — it has not seen enough charging sessions yet, and it gets steadier the longer you leave it running. The free app DevCheck shows design capacity against current capacity on some phones, straight from the system files, if you want a second opinion without waiting.
![]() |
| AccuBattery - Health tab after two weeks |
Confident users with a computer can also run adb shell dumpsys battery, which prints design and current capacity on many phones — but most people should stick with AccuBattery.
The Dial Code Everyone Recommends That No Longer Works
Almost every battery article on the internet tells you to dial *#*#4636#*#*. Ten years ago that was good advice. Today, on most modern phones, the Testing menu it opens has no Battery information page at all — and where one still appears, it shows charge level and temperature, not health. Samsung removes or restricts this menu on most Galaxy firmware, and other brands have quietly dropped the battery page too. If you tried it and found nothing, your phone is not broken. The code is simply out of date.
What Your Number Means — and When to Replace the Battery
- 90% or above (or Normal / Good): your battery is healthy. Keep doing what you are doing.
- 80% to 89% (or Weak): the battery is clearly worn. Days get shorter, and heavy use drains it fast. Still usable, but start thinking about a replacement within the next year.
- Below 80% (or Reduced / Bad): Google's own line for considering a replacement. At this point a new battery usually makes an old phone feel new again, and it is far cheaper than a new phone.
Watch for warning signs even if the number looks fine. A phone that shuts down at 20 or 30% charge, a back panel that feels swollen or is lifting away from the frame, or a phone that gets hot during normal use all point to a battery problem the software estimate has not caught yet. A swollen battery is a safety issue, not a nuisance — stop using the phone and take it to a service centre. When you do replace a battery, use an official service centre or a reputable repair shop, and ask what battery they fit. A cheap no-name battery can be worse than the worn original.
Buying a Used Android Phone? Run This Two-Minute Check First
A used phone's battery is the most expensive hidden problem you can inherit, so check it before you pay — not after. Ask the seller to open the brand check from this article right in front of you. A seller who refuses is telling you something. Health below 80% means you should negotiate the price down by the cost of a battery replacement, or walk away. A cycle count above 800 to 1,000 means the battery is near the end of its rated life, even if the percentage still looks fine. Check the back panel for swelling or a gap, and ask if the battery was ever replaced — an official replacement is a plus; an unknown one is a question mark.
How to Slow Battery Wear Down
You cannot stop a battery from ageing, but two habits slow it down more than anything else: keep the charge away from the extremes, and keep the phone cool.
Lithium-ion batteries wear fastest when they sit at 100% for hours — overnight charging is the classic example. Both Pixel and Samsung now let you cap it. On a Pixel 6a or later, open Settings > Battery > Battery health > Charging optimization and choose Limit to 80%. On a Samsung Galaxy running One UI 6.1 or later, open Settings > Battery > Battery protection, switch it on, and choose Maximum — on One UI 7 and later you can pick the limit yourself, so set it to 80%. If a day at 80% is enough for you, leave the cap on.
![]() |
| Pixel - Charging optimization, Limit to 80% |
Heat is the single biggest killer of phone batteries. Never leave your phone charging in a hot car, in direct sunlight, or under a pillow. Wireless and fast charging both generate extra heat, so if your phone feels warm, take the case off while it charges. And forget the old advice about draining the battery to zero — small top-ups through the day are gentler than full 0 to 100% cycles. A phone that spends its life between 20% and 80% will outlast one that is charged to full every night.
Frequently Asked Questions
Can I check battery health on Android without installing an app?
Yes, on the three biggest brands. Pixel 8a and newer have a Battery health screen in Settings. Samsung Galaxy phones have the Battery status diagnostic in the Samsung Members app. Xiaomi, Redmi and POCO phones have the *#*#6485#*#* dialler code. Only other brands, or older models without these menus, need an app like AccuBattery.
What is a good battery health percentage on Android?
Anything above 90% is good, and a new phone should read close to 100%. Between 80% and 89% is worn but usable. Below 80% is the point where Google recommends considering a replacement, because the shorter battery life starts to affect daily use.
Is AccuBattery accurate?
After two or more weeks of normal use, it gives a solid estimate — usually within a few percent of the real figure. On day one it is useless, because it has not observed enough charging sessions. Treat it as a good estimate, not an exact measurement.
Does *#*#4636#*#* show battery health?
Rarely, on modern phones. The Testing menu it opens usually has no battery information page any more, and where one exists it shows charge level and temperature, not health. Use the brand methods in this article instead.
Checking your battery health takes less than a minute on most phones. Now you know how to find out — and what to do with the answer.



